No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
| warnings = The Man harness knot must have the loop loaded or it will slip and contract easily. | | warnings = The Man harness knot must have the loop loaded or it will slip and contract easily. | ||
| tying_instructions = | | tying_instructions = | ||
# Lay the rope flat | |||
# Make a loop in the rope with the running end going beneath the standing part. | |||
# Pull the running end down so that it crosses over the loop. | |||
# Pull the bottom of the loop through the gap between the top of the loop and the running end. | |||
}} | }} | ||
Revision as of 23:44, 20 June 2007
| Man harness knot |
|---|
  Use: The Man harness is a knot with a loop on the bight for non-critical purposes. This knot is used when multiple people are to pull a load. Typically one end of the rope is tied to a load, and one man harness knots per puller will be tied along its length. Each loop is then pulled by a different puller.
How to tie:
WARNING: The Man harness knot must have the loop loaded or it will slip and contract easily.
|
